Table of Contents
Advertisement
(4) Shows the log classification.
ARL
CLI
CONSOLE
LINE-PROTOCOL
PORT
SNMP
SNTP
SYSTEM
TELNET
VLAN
DOT1X
(5) Details of logs are as follows.
ARL
Memory allocation fail!
err
Indicates that allocation of memory for MAC address table has failed.
CLI
Get reboot timer fail.
warn
Indicates that the operation of reboot timer has failed.
Reboot: Factory Default Except IP.
Indicates that the Switching Hub was rebooted in the mode to return settings
other than IP addresses to the factory default.
Reboot: Factory Default.
info
Indicates that the Switching Hub was rebooted in the mode to return all settings
to the factory default.
Reboot: Normal.
Indicates that the Switching Hub was rebooted.
CONSOLE
Login from console
info
Indicates that the login operation was executed via console, and was successful.
LINE-PROTOCOL
PortX auto recovery.
Indicates that Port X has auto-recovered from shutoff after loop detection.
The loop detected between portA and portB.
info
Indicates that a loop was detected between Port A and Port B.
The loop detected on portX.
Indicates that a loop was detected on Port X.
PORT
err
PortX hardware register set fail in port initialization!
A log relating to MAC address table
A log relating to CLI
A log relating to console
A log relating to loop detection function
A log relating to port
A log relating to SNMP
A log relating to SNTP
A log relating to system
A log relating to telnet
A log relating to VLAN
A log relating to IEEE802.1X (This function is not supported.)
251
Advertisement
Table of Contents
