Command Hierarchy - Panasonic PN28160A Operation Manual

1. Command Hierarchy

There are four levels in the hierarchy.
(1) User mode:
This is the default mode after login. Limited operations are allowed.
(2) Privileged mode:
This mode allows you to check the state of the Switching Hub, to edit configuration files,
etc.
(3) Global configuration mode:
This mode allows you to set the general configuration of the Switching Hub.
(4) Interface configuration mode:
This mode allows you to set individual items, such as each port and each VLAN, in
details.
M24eG> enable
M24eG# configure
M24eG(config)# interface gi0/1
M24eG(config-if)# exit
M24eG(config)# exit
M24eG#
enable Command
• Enter this command to switch from the User mode to the Privileged mode.
M24eG> ··································· User mode
M24eG> enable ·························· User mode  Privileged mode
M24eG# ··································· Privileged mode
M24eG# disable ·························· Privileged mode  User mode
M24eG> ··································· User mode
disable Command
• Enter this command to switch from the Privileged mode to the User mode.
M24eG# ··································· Privileged mode
M24eG# disable ·························· Privileged mode  User mode
M24eG> ··································· User mode
Fig. 1-1 Command hierarchy
9