Table of Contents
Advertisement
<Command Entry Example>
An example of executing the command to show the monitoring configuration is shown
below.
M16eG> enable
M16eG# show monitor
(1)
Port monitor status : Disabled
(2)
Monitoring direction : Both
(3)
Monitoring port
(4)
Monitored port
M16eG#
Fig. 4-3-1 Example of executing the command to show the monitoring configuration
(1) Port monitor status
Shows the status of the port monitoring function (Enabled or Disabled).
Enabled
Disabled
(2) Monitoring direction
Indicates which packet should be monitored, the transmit packet or the receive packet.
Tx
Rx
Both
(3) Monitoring port
Shows the port number of a port to monitor other port's packets.
(4) Monitored port
Shows the port number of a port to be monitored.
: 1
: 2
The port monitoring function is enabled.
The port monitoring function is disabled.
The transmit packet is monitored.
The receive packet is monitored.
Both of the transmit and receive packet are monitored.
154
Advertisement
Table of Contents
