<Configuration Example>
Overview: Transfer the current configuration information to a TFTP server whose IP address
is 192.168.1.1, specifying the file name as "switch-1.cfg".
(To cancel the TFTP transfer process, press Ctrl+C during transfer.)
M24eG> enable
M24eG# copy running-config tftp 192.168.1.1 switch-1.cfg
M24eG#
Fig. 6-1 Example of transferring the configuration information
<Configuration Example>
Overview: Reflect the configuration file on a TFTP server to this Switching Hub.
(1) Retrieve the configuration file "switch-2.cfg" from a TFTP server whose IP address
is 172.16.1.1.
(2) Save the retrieved configuration information. (For details, refer to chapter 11.)
(To cancel the TFTP transfer process, press Ctrl+C during transfer.)
M24eG> enable
(1)
M24eG# copy tftp 172.16.1.1 switch-2.cfg running-config
(2)
M24eG# copy running-config startup-config
Configuration saved to startup_config
M24eG#
Fig. 6-2 Example of transferring the configuration information
Note:
The configuration information is not automatically saved in this Switching Hub just
by retrieving the configuration file from the TFTP server. Make sure to save the
configuration information.
(this Switching Hub TFTP server)
(TFTP server this Switching Hub)
233