Panasonic PN28160A Operation Manual page 112

<Command Entry Example>
An example of executing the command to show the SNTP configuration is shown below.
M24eG> enable
M24eG# show sntp
(1)
Clock Time
(2)
SNTP
(3)
SNTP Server
(4)
SNTP Polling Interval: 60 (min)
(5) Time Zone
(6)
Daylight Saving
M24eG#
Fig. 3-7-1 Example of executing the command to show the SNTP configuration
(1) Clock Time
Shows the present Switching Hub clock time.
(2) SNTP
Shows the SNTP status (Enabled or Disabled).
Enabled
Disabled
(3) SNTP Server
Shows the SNTP server address configuration.
(4) SNTP Polling Interval
Shows the time acquisition interval.
(5) Time Zone
Shows the time zone configuration.
(6) Daylight Saving
Shows the daylight saving configuration.
Enabled
Disabled
: Wed, 21 Jul 2010 12:00:00
: Enabled
: 192.168.1.1
: (GMT+09:00) Osaka,Sapporo,Tokyo
: Disabled
The SNTP function is enabled.
The SNTP function is disabled.
Daylight saving is enabled.
Daylight saving is disabled.
112