Panasonic PN28160A Operation Manual page 46

(4) Mode
Shows the port communication speed and duplex mode (full or half).
Auto
1000F
100-FDx
("100F" under the
"Auto" mode)
100-HDx
("100H" under the
"Auto" mode)
10-FDx
("10F" under the "Auto"
mode)
10-HDx
("10H" under the "Auto"
mode)
(5) FlowCtrl
Shows the flow control setting.
Enabled
Disabled
(6) Auto-MDI
Shows the Auto MDI/MDI-X setting.
Enabled
Disabled
(7) Jumbo
Shows the jumbo frame setting.
Enabled
Disabled
The auto negotiation function is enabled when the port link is down.
While the link is up, the string enclosed in parentheses shows the
communication speed and full-duplex/half-duplex mode.
The port is in the 1000 Mbps full-duplex mode.
The port is in the 100 Mbps full-duplex mode.
The port is in the 100 Mbps half-duplex mode.
The port is in the 10 Mbps full-duplex mode.
The port is in the 10 Mbps half-duplex mode.
The flow control is enabled.
The flow control is disabled.
The Auto MDI/MDI-X is enabled.
The Auto MDI/MDI-X is disabled.
The jumbo frame is enabled.
The jumbo frame is disabled.
46