Panasonic PN28160A Operation Manual page 34

<Command Entry Example>
An example of executing the command to show the SNMP information is shown below.
M24eG> enable
M24eG# show snmp
(1)
SNMP Agent: Disabled
(2)
SNMP Manager List:
(3) (4)
No. Status
---- --------
1 Enabled
2 Enabled
3 Disabled
4 Disabled
5 Disabled
6 Disabled
7 Disabled
8 Disabled
9 Disabled
10 Disabled
(8)
Trap Reciever List:
(9) (10)
No. Status
---- --------
1 Disabled
2 Disabled
3 Disabled
4 Disabled
5 Disabled
6 Disabled
7 Disabled
8 Disabled
9 Disabled
10 Disabled
Individual Trap
(14)
SNMP Authentication Failure: Disabled
(15)
(16) Login Failure
(17) Enable Link Up/Down Port
M24eG#
Fig. 3-3-1 Example of executing the command to show the SNMP information
(1) SNMP Agent
Shows the SNMP agent settings.
Enabled
Disabled
(5) (6)
IP Address Access SNMP Community String
--------------- ------ --------------------------------
0.0.0.0 ro
0.0.0.0 rw
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
(11) (12)
IP Address Version Trap Community String
--------------- ------- ------------------------------
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
: Disabled
: all
The SNMP agent is enabled.
The SNMP agent is disabled.
34
(7)
public
private
(13)