copy tftp <ip address> <file_name> image
Upgrades the firmware version, and automatically reboots.
If the reboot timer is set as in section 8.3, the reboot timer starts and the Switching
Hub is rebooted after the set time.
[Parameter]
Parameter name
<ip-address>
<filename>
[Factory Default Setting]
Parameter name
<ip-address>
<filename>
[Setting Range]
Parameter name
<ip-address>
<filename>
[Note]
Parameter name
<ip-address>
<filename>
Note:
Make sure not to turn off power while upgrading. Otherwise, the Switching Hub may
not be able to boot up.
Description
Set the IP address of the TFTP server.
Set the file name of the firmware.
Factory default setting
None
None
Setting range
1.0.0.1 to 223.255.254.254
1 to 39 one-byte alphanumeric characters
Note
None
None
235