Panasonic PN28160A Operation Manual page 205

led base-mode <status | eco>
Configures the LED base mode.
[Parameter]
Parameter name
<status | eco>
[Factory Default Setting]
Parameter name
<status | eco>
[Setting Range]
Parameter name
<status | eco>
[Note]
Parameter name
<status | eco>
Description
Configure the LED base mode.
status Automatically Switching Hubs to the status mode
if the LED display change button is not pressed
for 1 minute.
eco Automatically switches to the eco mode if the LED
display change button is not pressed for 1 minute.
Factory default setting
status
Setting range
Either "status" or "eco"
Note
None
205