Panasonic PN28160A Operation Manual page 137

pvid <vlan-id>
Changes the PVID (Port VLAN ID). Packets sent by a configured port to the VLAN
identified by the PVID are untagged. Received untagged packets are handled as packets
for the VLAN identified by the PVID.
* This command is executed in interface configuration mode of each port.
[Parameter]
Parameter name
<vlan-id>
[Factory Default Setting]
Parameter name
<vlan-id>
[Setting Range]
Parameter name
<vlan-id>
[Note]
Parameter name
<vlan-id>
Description
Set the PVID (Port VLAN ID). Only one PVID can be set
for each port.
Factory default setting
1
Setting range
1 to 4094
Note
None
137