Panasonic PN28160A Operation Manual page 245

<Configuration Example>
Overview: Set the time until the Switching Hub reboot to 10 seconds, and execute the
reboot.
(1) Set the reboot timer to 10 seconds.
(2) Execute the reboot command.
(3) Press "y" in reboot confirmation.
(4) The Switching Hub is rebooted after 10 seconds according to the reboot timer.
(To cancel the reboot, press Ctrl and C.)
M24eG> enable
M24eG# configure
(1)
M24eG(config)# reboot timer 10
M24eG(config)# exit
(2)
M24eG# reboot normal
(3)
Are you sure to reboot the system?(Y/N) y
(4)
The system will reboot 10 seconds later. You can press CTRL+c to cancel it.
M24eG#
Fig. 8-3-1 Example of executing the reboot timer
245