Table of Contents
Advertisement
interface vlan<vlan-id>
Creates and configures VLAN. Execution of this command enables interface configuration
mode for the specified VLAN.
[Parameter]
Parameter name
<vlan-id>
[Factory Default Setting]
Parameter name
<vlan-id>
[Setting Range]
Parameter name
<vlan-id>
[Note]
Parameter name
<vlan-id>
Note:
When creating a new VLAN, PVID (after-mentioned) is not changed in conjunction
with this new creation. Make sure to confirm the configuration. When you wish to
delete a VLAN, you cannot delete it if the VLAN ID of the VLAN to be deleted
still remains as a PVID. Delete the VLAN after changing the PVID to another ID.
Note:
To delete a created VLAN ID, execute the command to configure the VLAN members
without setting any VLAN member parameter in interface configuration mode for the
VLAN ID to be deleted. (The VLAN member is left blank.)
Description
Set the VLAN ID of the VLAN to be created.
Factory default setting
Only VLAN 1 (default VLAN) has been created.
Setting range
1 to 4094
Note
Execute the command in "vlan<vlan-id>" form like vlan10.
No spaces are allowed between vlan and <vlan-id>.
133
Advertisement
Table of Contents
