Panasonic PN28160A Operation Manual page 176

AccessControl outprofile <index> committed-rate <unit> burst-size <volume> {deny | permit
[dscp <value>]}
Configures the out-profile used for the access control function.
no AccessControl outprofile <index>
Deletes the out-profile used for the access control function.
[Parameter]
Parameter name
<index>
<unit>
<volume>
{deny | permit [dscp
<value>]}
[Factory Default Setting]
Parameter name
None
[Setting Range]
Parameter name
<index>
<unit>
<volume>
<dscp-value>
[Note]
Parameter name
None
Description
Specify the out-profile index number.
Specify the committed rate in Mbps.
Specify the burst size with the burst size number.
Specify whether packets are denied or permitted.
deny Packets are denied.
permit Packets are permitted. You can select the
value type from the following for marking at
the permission.
- DSCP value
Factory default setting
None
Setting range
1 to 65535
1 to 1000
1 to 5
Select a number from the following to specify the burst size.
1: 4K, 2: 8K, 3: 16K, 4: 32K, 5: 64K
0 to 63
Note
None
176