Panasonic PN28160A Operation Manual page 102

<Command Entry Example>
An example of executing the command to show the MAC address table (dynamic entries)
is shown below.
M24eG> enable
M24eG# show mac-address-table mac
(1)
MAC Address
----------------- ------------ ---- ---------
xx:xx:xx:xx:xx:xx Dynamic
xx:xx:xx:xx:xx:xx Dynamic
M24eG#
Fig. 3-6-3 Example of executing the command to show the MAC address table
(1) MAC Address
Lists MAC address entries existing in the MAC address table.
(2) Address Type
Shows the MAC address entry type.
Dynamic
(3) VLAN
Shows the VLAN ID that is learning the MAC address entry.
(4) Port
Shows the interface name.
gi0/1
(2) (3) (4)
Address Type VLAN Port
1 gi0/1
1 gi0/1
(dynamic entries)
Dynamically learned MAC address entry
Refers to "Gigabit Ethernet Port 1."
(The number after "gi0/" indicates the port number.)
102