Panasonic PN28160A Operation Manual page 220

<Command Entry Example>
An example of executing the command to show the port group information is shown
below.
M24eG> enable
M24eG# show port-group
(1) (2)
Total Groups : 3
Group ID Group Name
-------- ---------------- --------------------------------- --------
1 Group_1
2 Group_2
M24eG#
Fig. 4-10-1 Example of executing the command to show the port group information
(1) Group ID
Shows the port group ID.
(2) Group Name
Shows the port group name.
(2) Group Member
Shows member ports in the port group.
(3) Status
Shows the status of port grouping.
Enabled
Disabled
(3)
Group Member
1-2
2-4
Port grouping is enabled.
Port grouping is disabled.
220
(4)
Status
Enabled
Disabled