Table of Contents
Advertisement
(3) Mode
Shows the port communication speed and duplex mode (full or half).
Auto
1000F
100-FDx
("100F" under the
"Auto" mode)
100-HDx
("100H" under the
"Auto" mode)
10-FDx
("10F" under the "Auto"
mode)
10-HDx
("10H" under the "Auto"
mode)
(4) Loop detection
Shows the status of the loop detection/shut-off function.
Enabled
Disabled
(5) Power-saving
Shows the status of the MNO series power saving mode.
Disabled
Full
Half
The auto negotiation function is enabled when the port link is down.
While the link is up, the string enclosed in parentheses shows the
communication speed and full-duplex/half-duplex mode.
The port is in the 1000 Mbps full-duplex mode.
The port is in the 100 Mbps full-duplex mode.
The port is in the 100 Mbps half-duplex mode.
The port is in the 10 Mbps full-duplex mode.
The port is in the 10 Mbps half-duplex mode.
The loop detection/shut-off function is enabled.
The loop detection/shut-off function is disabled.
The MNO series power saving mode is disabled.
The MNO series power saving mode is enabled.
The MNO series power saving mode of giving priority to connectivity
with other device.
218
Advertisement
Table of Contents
