Panasonic PN28160A Operation Manual page 28

<Configuration Example>
Overview: Set a username and password for the Switching Hub.
(1) Set a new username to "user1."
(2) Enter the current password.
(The factory default setting is "manager.")
(3) Enter a new password.
(4) Enter the new password again.
M24eG> en
M24eG# configure
(1)
M24eG(config)# username user1
(2)
Enter old password: *******
(3)
Enter new password: *******
(4)
Enter new password again: *******
M24eG(config)#
Fig. 3-1-1-1 Example of the username and password configuration
28