<Configuration Example 1>
Overview: Enable the Internet mansion function with Ports 23 and 24 set as uplink
ports.
(1) Configure the Internet mansion function with Ports 23 and 24 set as uplink ports.
(2) Enter y to enable the Internet mansion function.
(All VLAN configuration and PVID of each port are reset.)
M24eG> enable
M24eG# configure
(1)
M24eG(config)# internet mansion 23,24
This command will remove all VLANs other than VLAN1, and the PVID of all ports will
(2)
be VLAN1. [Y/N] : y
M24eG(config)# exit
M24eG#
Fig. 4-1-1-2 Example of configuration of the Internet mansion function
146