Panasonic PN28160A Operation Manual page 123

<Command Entry Example>
An example of executing the command to show the ARP table information is shown
below.
M24eG> enable
M24eG# show arp sort ip
(1)
IP Address
---------------
192.168.0.100
M24eG#
Fig. 3-8-1 Example of executing the command to show the ARP table information
(1) IP Address
Lists learned IP addresses in the ARP table.
(2) HWaddress
Lists learned MAC addresses in the ARP table.
(3) Type
Shows the learning type for the ARP table.
Dynamic
Static
(2) (3)
HWaddress
-----------------
00:00:00:00:00:01
Auto-learned address information
Information of an address registered according to the configuration
123
Type
----------
Static