Line Configuration; Loop Detection Configuration - Panasonic PN28160A Operation Manual

4.9.

Line Configuration

Configure the settings related to loop detection function and the power saving mode in "Interface
configuration mode."

4.9.1. Loop Detection Configuration

Enable or disable the loop detection function and configure the auto-recovery in "Interface
configuration mode." Confirm the loop history by executing the "show line loopback history"
command in "Privileged mode."
Command to show the loop history
M24eG#
Command to delete the loop history
M24eG#
Command to enable the loop detection function
M24eG(config-if)#
Command to disable the loop detection function
M24eG(config-if)#
Command to enable the auto-recovery function
M24eG(config-if)#
Command to disable the auto-recovery function
M24eG(config-if)#
show line loopback history [tail <line>]
line loopback history clear
line loopback
no line loopback
line loopback shutdown <sec>
no line loopback shutdown
207