Table of Contents
Advertisement
<Configuration Example>
Overview: Enable the bandwidth control for Port 1, and set the bandwidth.
(1) Enable the bandwidth control function.
(2) Set the bandwidth to 100 (Mbps).
M24eG> enable
M24eG# configure
M24eG(config)# interface gi0/1
(1)
M24eG(config-if)# egress-rate-limit
(2)
M24eG(config-if)# egress-rate-limit 100
M24eG(config-if)# end
M24eG#
Fig. 4-6-2 Example of the bandwidth control configuration
193
Advertisement
Table of Contents
