frame-type { all|tag-only }
Changes the type of frames received by ports.
* This command is executed in interface configuration mode of each port.
[Parameter]
Parameter name
{ all|tag-only }
[Factory Default Setting]
Parameter name
{ all|tag-only }
[Setting Range]
Parameter name
{ all|tag-only }
[Note]
Parameter name
{ all|tag-only }
Description
Set the type of received frames.
all
Receives all frames.
tag-only
Receives only VLAN-tagged frames.
Factory default setting
all
Setting range
Either "all" or "tag-only"
Note
None
138