Bandwidth Control Configuration - Panasonic PN28160A Operation Manual

4.6.

Bandwidth Control Configuration

Configure the bandwidth control in "Interface configuration mode." Confirm the basic information
by executing the "show egress-rate-limit" command in "Privileged mode."
Command to configure the bandwidth control
Interface configuration mode
Command to enable the bandwidth control
Interface configuration mode
Command to disable the bandwidth control
Interface configuration mode
Command to show the bandwidth control configuration
Privileged mode
egress-rate-limit [<unit(1Mbps/unit)>]
egress-rate-limit
no egress-rate-limit
show egress-rate-limit
189