Panasonic PN28160A Operation Manual page 129

Configure the VLAN setting in "Global configuration mode" or "Interface configuration mode."
Confirm the configuration information by executing the "show vlan all" command in "Privileged
mode."
Command to show the VLAN configuration
M24eG#
Command to create and configure VLAN
M24eG(config)#
Command to set the VLAN name
M24eG(config-if)#
Command to delete the VLAN name
M24eG(config-if)#
Command to set the VLAN members
M24eG(config-if)#
Command to set the management VLAN
M24eG(config-if)#
Command to delete the management VLAN
M24eG(config-if)#
Command to set the PVID
M24eG(config-if)#
Command to set the frame type
M24eG(config-if)#
show vlan {all | <vlan-id-list>}
interface vlan<vlan-id>
name <name>
no name
member <port-list>
management
no management
pvid <vlan-id>
frame-type { all|tag-only }
129