Panasonic PN28160A Operation Manual page 180

<Configuration Example 1>
Overview: Configure the access control to discard packets destined for 192.168.1.0/24.
(1) Configure the classifier to target packets destined for an IP address of
192.168.1.0/24.
(2) Configure the in-profile to discard the target packets.
(3) Configure the port list to target all ports.
(4) Associate configuration items above with policy 1 and set the policy sequence
to 1 for application with top priority.
M24eG> enable
M24eG# configure
(1)
M24eG(config)# AccessControl classifier 1 dst-net 192.168.1.0/24
(2)
M24eG(config)# AccessControl inprofile 1 deny
(3)
M24eG(config)# AccessControl portlist 1 1-24
(4)
M24eG(config)# AccessControl policy 1 portlist 1 classifier 1 policy-sequence 1
inprofile 1
M24eG(config)#
Fig. 4-4-4 Example of the access control configuration 1
180