Panasonic PN28160A Operation Manual page 11

end Command
• Enter this command to switch from configuration modes to the Privileged mode.
M24eG(config-if)# end ················· Interface configuration mode
M24eG# configure
M24eG(config)# end ··················· Global configuration mode
logout Command
• Enter this command to return to the menu screen from any command mode.
M24eG(config)# logout ················· Configuration mode  Menu
? Command
• Enter a question mark (?) to view available commands in that command mode.
M24eG> ?･
enable - Turn on privileged mode command
exit - Exit current mode and down to previous mode
logout - To logout from the CLI shell
ping - Send ICMP ECHO_REQUEST to network hosts
M24eG>
Command History Support
• Press the  (up arrow) key to view the history of the entered commands.
 Privileged mode
 Privileged mode
Fig. 1-2 ? command
11