Table of Contents
Advertisement
<Example of use>
Overview: Display system logs of the Switching Hub, and then delete the logs.
(1) Display the system logs of the Switching Hub.
(2) Delete the system logs of the Switching Hub.
(3) Confirm that the system logs of the Switching Hub are deleted.
M24eG> enable
(1)
M24eG# show syslog
Jan 01 20:14:34 kern.info [PORT] Port1 is authorized!
Jan 01 20:14:34 kern.info [LINE-PROTOCOL] The loop detected on port 1.
Jan 01 20:16:00 kern.info [PORT] Port1 is authorized!
Jan 01 20:16:00 kern.info [LINE-PROTOCOL] The loop detected on port 1.
Jan 01 20:17:06 kern.info [PORT] Port1 is authorized!
Jan 01 20:17:06 kern.info [LINE-PROTOCOL] The loop detected on port 1.
Jan 01 22:42:29 kern.info [SYSTEM] Success: Reload system default-config!
Jan 01 22:42:32 kern.info [CLI] System reboot via CLI.
Jan 01 22:42:32 kern.info [SYSTEM] Reboot the system!
(2)
M24eG# syslog clear
M24eG# show syslog
(3)
Syslog history is empty!
M24eG#
Fig. 10-2 Example of display and deletion of system logs
257
Advertisement
Table of Contents
