Panasonic PN28160A Operation Manual page 173

AccessControl classifier <id>
[src-mac <MAC>] [dst-mac <MAC>] [src-net <ip-mask>]
[dst-net <ip-mask>] [src-port <layer4-port-list>] [dst-port <layer4-port-list>]
[vlan-id <vid>] [dot1p-priority <priority>] [dscp <value>] [protocol <pro-num>]
[icmp-type <0-18>] [tcp-syn-flag{true/false}]
Configures the classifier used for the access control function.
no AccessControl classifier <id>
Deletes the classifier used for the access control function.
[Parameter]
Parameter name
<id>
[src-mac <MAC>]
[dst-mac <MAC>]
[src-net <ip-mask>]
[dst-net <ip-mask>]
[src-port
<layer4-port-list>]
[dst-port
<layer4-port-list>]
[vlan-id <vid>]
[dot1p-priority
<priority>]
[dscp <value>]
[protocol <pro-num>]
[icmp-type
<icmptype>]
[tcp-syn-flag{true/fals
e}]
[Factory Default Setting]
Parameter name
None
Description
Specify the classifier index number.
Specify the source MAC address.
Specify the destination MAC address.
Specify the source IP network and mask.
Specify the destination IP network and mask.
Specify the TCP/UDP source port number.
Specify the TCP/UDP destination port number.
Specify the VLAN ID.
Specify the IEEE 802.1p priority.
Specify the DSCP value.
Specify the protocol type with the protocol number.
Specify the ICMP type with the type number.
Specify whether a TCP SYN flag is set for filtering.
true A TCP SYN flag is set for filtering.
false A TCP SYN flag is not set for filtering.
Factory default setting
None
173