AudioCodes MediaPack MP-124 User Manual page 263

SIP User's Manual
ini File Parameter
ForkingHandlingMode
Account
Version 5.4
Determines how the device reacts to forking of outgoing INVITE
messages by the Proxy.
[0] = Sequential. The device opens a voice stream toward the first
18x SIP response that includes an SDP, and disregards any 18x
response with an SDP received thereafter (default).
[1] = Parallel. The device opens a voice stream toward the first 18x
SIP response that includes an SDP, and re-opens the stream toward
any subsequent 18x responses with an SDP.
Note: Regardless of the ForkingHandlingMode value, once a 200 OK
response is received, the device uses the RTP information and re-opens
the voice stream, if necessary.
This ini file table parameter configures the Account table for registering
and/or authenticating (digest) a Hunt Group (e.g., IP-PBX) to a Serving
IP Group (e.g., Internet Telephony Service Provider - ITSP). The format
of this parameter is as follows:
[Account]
FORMAT Account_Index = Account_ServedTrunkGroup,
Account_ServedIPGroup, Account_ServingIPGroup,
Account_Username, Account_Password, Account_HostName,
Account_Register;
[\Account]
Where,
ServedTrunkGroup = Hunt Group ID for which the device performs
registration/authentication to a destination IP Group.
ServedIPGroup = Currently not applicable (see note below).
ServingIPGroup = Destination IP (Group) to where the device sends
the REGISTER requests (and/or digest authentication username and
password) for registering (and/or authenticating) the Hunt Group.
Username = Digest authentication user name.
Password = Digest authentication password.
HostName = Register request URI host name sent by the device to
the Serving IP Group.
Register = Enables registration mode (i.e., device sends REGISTER
requests to Serving IP Group).
For example:
[Account]
FORMAT Account_Index = Account_ServedTrunkGroup,
Account_ServedIPGroup, Account_ServingIPGroup,
Account_Username, Account_Password, Account_HostName,
Account_Register;
Account 0 = 1, -1, 1, user, 1234, acl, 1;
[\Account]
Notes:
This table can include up to 10 indices.
The table item Account_ServedIPGroup is currently not applicable
and must be left empty (or assigned the value -1). It is used only for
IP-to-IP routing applications (supported in the next applicable
release).
263
4. ini File Configuration
Description
May 2008