AudioCodes MediaPack MP-124 User Manual page 250

ini File Parameter
EnableSecureStartup
SIPSRequireClientCerti
ficate
IPSec Parameters
EnableIPSec
IPSecDPDMode
IPSEC_SPD_TABLE
SIP User's Manual
Enables the Secure Startup mode. In this mode, downloading the *.ini file
to the device is restricted to a URL provided in initial configuration (see
parameter IniFileURL) or using DHCP.
[0] Disable (default).
[1] Enable = disables TFTP and allows secure protocols such as
HTTPS to fetch the device configuration.
Note: For a detailed explanation on Secure Startup, refer to the Product
Reference Manual.
Determines the device's behavior when acting as a server for TLS
connections.
[0] = The device does not request the client certificate (default).
[1] = The device requires receipt and verification of the client certificate
to establish the TLS connection.
Notes:
The SIPS certificate files can be changed using the parameters
HTTPSCertFileName and HTTPSRootFileName.
This parameter cannot be changed on-the-fly and requires a device
reset.
For a description of this parameter, refer to ''Configuring the General
Security Settings'' on page 89.
For a description of this parameter, refer to ''Configuring the General
Security Settings'' on page 89.
This ini file table parameter configures the IPSec SPD table. The format of
this parameter is as follows:
[IPSEC_SPD_TABLE]
Format SPD_INDEX = IPSecMode, IPSecPolicyRemoteIPAddress,
IPSecPolicySrcPort, IPSecPolicyDStPort,IPSecPolicyProtocol,
IPSecPolicyLifeInSec, IPSecPolicyLifeInKB,
IPSecPolicyProposalEncryption_X,
IPSecPolicyProposalAuthentication_X,
IPSecPolicyKeyExchangeMethodIndex,
IPSecPolicyLocalIPAddressType,
IPSecPolicyRemoteTunnelIPAddress, IPsecPolicyRemoteSubnetMask;
[\IPSEC_SPD_TABLE]
Where,
Mode = IPSec mode of operation: [0] Transport, [1] Tunneling.
PolicyRemoteIPAddress = Destination IP address (or FQDN) to which
the IPSec mechanism is applied.
PolicySrcPort = Source port to which the IPSec mechanism is applied.
PolicyDStPort = Destination port to which the IPSec mechanism is
applied.
PolicyProtocol = Protocol type to which the IPSec mechanism is
applied: [0] Any protocol (default), [17] (UDP), [6] (TCP), any other
protocol type defined by IANA (Internet Assigned Numbers Authority).
PolicyLifeInSec = Time (in seconds) that the SA negotiated in the
second IKE session (quick mode) is valid. After the time expires, the SA
250
Description
Document #: LTRT-65410
MediaPack Series