AudioCodes MediaPack MP-124 User Manual page 72

Parameter
V.23 Modem Transport Type
[V23ModemTransportType]
V.32 Modem Transport Type
[V32ModemTransportType]
V.34 Modem Transport Type
[V34ModemTransportType]
Fax Relay Redundancy Depth
[FaxRelayRedundancyDepth]
Fax Relay Enhanced
Redundancy Depth
[FaxRelayEnhancedRedundanc
yDepth]
Fax Relay ECM Enable
[FaxRelayECMEnable]
Fax Relay Max Rate (bps)
[FaxRelayMaxRate]
SIP User's Manual
V.23 Modem Transport Type used by the device.
[0] Disable = Disable (Transparent)
[1] Enable Relay = N/A
[2] Enable Bypass = (default)
[3] Events Only = Transparent with Events
V.32 Modem Transport Type used by the device.
[0] Disable = Disable (Transparent)
[1] Enable Relay = N/A
[2] Enable Bypass = (default)
[3] Events Only = Transparent with Events
Note: This option applies to V.32 and V.32bis modems.
V.90 / V.34 Modem Transport Type used by the device.
[0] Disable = Disable (Transparent)
[1] Enable Relay = N/A
[2] Enable Bypass = (default)
[3] Events Only = Transparent with Events
Number of times that each fax relay payload is retransmitted to the
network.
[0] = No redundancy (default).
[1] = One packet redundancy.
[2] = Two packet redundancy.
Note: This parameter is applicable only to non-V.21 packets.
Number of times that control packets are retransmitted when using
the T.38 standard.
The valid range is 0 to 4. The default value is 2.
Determines whether the Error Correction Mode (ECM) mode is
used during fax relay.
[0] Disable = ECM mode is not used during fax relay.
[1] Enable = ECM mode is used during fax relay (default).
Maximum rate (in bps), at which fax relay messages are
transmitted (outgoing calls).
[0] 2400 = 2.4 kbps.
[1] 4800 = 4.8 kbps.
[2] 7200 = 7.2 kbps.
[3] 9600 = 9.6 kbps.
[4] 12000 = 12.0 kbps.
[5] 14400 = 14.4 kbps (default).
Note: The rate is negotiated between the sides (i.e., the device
adapts to the capabilities of the remote side).
72
MediaPack Series
Description
Document #: LTRT-65410