Figure 3-64: Keypad Features - AudioCodes MediaPack MP-124 User Manual

SIP User's Manual
Notes:
To configure the keypad features, take these 4 steps:
1. Open the 'Keypad Features' page (Configuration tab > Protocol Configuration
menu > SIP Advanced Parameters submenu > Keypad Features page item).
2. Configure the Keypad Features according to the table below.
3. Click the Submit button to save your changes.
4. To save the changes to the flash memory, refer to ''Saving Configuration'' on page
207.
Version 5.4
•
The 'Keypad Features' page is only available if the device supports FXS
interface .
•
The method used by the device to collect dialed numbers is identical to
the method used during a regular call (i.e., max digits, interdigit timeout,
digit map, etc.).
•
The activation of each feature remains in effect until it is deactivated (i.e.,
not deactivated after a call).
Figure 3-64: Keypad Features Page
143
3. Web-Based Management
May 2008