AudioCodes MediaPack MP-124 User Manual page 273

SIP User's Manual
ini File Parameter
IPProfile
Version 5.4
This ini file table parameter configures the IP profiles table. The format
of this parameter is as follows:
[IPProfile]
FORMAT IPProfile_Index = IPProfile_ProfileName,
IPProfile_IpPreference, IPProfile_CodersGroupID,
IPProfile_IsFaxUsed*, IPProfile_JitterBufMinDelay*,
IPProfile_JitterBufOptFactor*, IPProfile_IPDiffServ*,
IPProfile_SigIPDiffServ*, N/A, IPProfile_RTPRedundancyDepth,
IPProfile_RemoteBaseUDPPort, IPProfile_CNGmode,
IPProfile_VxxTransportType, IPProfile_NSEMode, N/A,
IPProfile_PlayRBTone2IP, IPProfile_EnableEarlyMedia*,
IPProfile_ProgressIndicator2IP*, IPProfile_EnableEchoCanceller*,
IPProfile_MediaSecurityBehaviour, IPProfile_CallLimit;
[\IPProfile]
For example:
[IPProfile]
IPProfile_1 = name1,2,1,0,10,13,15,44,1,1,6000,0,2,0,0,0,1,0,1,0,-1;
IPProfile_2 =
name2,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,$$,,$$,4
0;
[\IPProfile]
Notes:
This parameter can appear up to 9 times (i.e., indices 1-9).
* Indicates common parameters used in both IP and Tel profiles.
IpPreference = determines the priority of the Profile (1 to 20, where
20 is the highest preference). If both IP and Tel profiles apply to the
same call, the coders and other common parameters (indicated with
an asterisk) of the preferred Profile are applied to that call. If the Tel
and IP profiles are identical, the Tel Profile parameters are applied.
Two adjacent dollar signs ('$$') indicate that the parameter's default
value is used.
IPProfile can be used in the 'Tel to IP Routing' and 'IP to Hunt
Group Routing' tables (Prefix and PSTNPrefix parameters).
The 'Profile Name' assigned to a Profile index, must enable users to
identify it intuitively and easily.
To configure the IP Profile table using the Web interface, refer to ''IP
Profile Settings'' on page 170.
For a description of using ini file table parameters, refer to
''Structure of ini File Table Parameters'' on page 229.
273
4. ini File Configuration
Description
May 2008