AudioCodes MediaPack MP-124 User Manual page 296

ini File Parameter
AltRouteCauseIP2Tel
FilterCalls2IP
Alternative Routing Parameters
RedundantRoutingMode
AltRoutingTel2IPEnable
AltRoutingTel2IPMode
AltRoutingTel2IPConnMet
hod
IPConnQoSMaxAllowedPL For a description of this parameter, refer to ''Routing General
IPConnQoSMaxAllowedDe
lay
Phone-Context Parameters
AddPhoneContextAsPrefi
x
PhoneContext
SIP User's Manual
This ini file table parameter configures call failure reason values
received from the TelPSTN side . If a call is released as a result of one
of these reasons, the device attempts to locate an alternative Hunt
Group for the call in the 'IP to Hunt Group Routing' table.
The format of this parameter is as follows:
[AltRouteCauseIP2Tel]
FORMAT AltRouteCauseIP2Tel_Index =
AltRouteCauseIP2Tel_ReleaseCause;
[\AltRouteCauseIP2Tel]
For example:
[AltRouteCauseIP2Tel]
AltRouteCauseIP2Tel 0 = 3
AltRouteCauseIP2Tel 1 = 1
AltRouteCauseIP2Tel 2 = 17 (Busy Here)
[\AltRouteCauseIP2Tel]
Notes:
This parameter can include up to 5 indices.
For defining the Reasons for Alternative Routing table using the
Web interface, refer to ''Reasons for Alternative Routing'' on page
164.
For an explanation on usng ini file table parameters, refer to
''Structure of ini File Table Parameters'' on page 229.
For a description of this parameter, refer to ''Advanced Parameters'' on
page 127.
Determines the type of redundant routing mechanism to implement
when a call can't be completed using the main route.
[0] = No redundant routing is used. If the call can't be completed
using the main route (using the active Proxy or the first matching rule
in the internal routing table), the call is disconnected.
[1] = Internal routing table is used to locate a redundant route
(default).
[2] = Proxy list is used to locate a redundant route.
For a description of this parameter, refer to ''Routing General
Parameters'' on page 153.
For a description of this parameter, refer to ''Routing General
Parameters'' on page 153.
For a description of this parameter, refer to ''Routing General
Parameters'' on page 153.
Parameters'' on page 153.
For a description of this parameter, refer to ''Routing General
Parameters'' on page 153.
For a description of this parameter, refer to ''Mapping NPI/TON to
Phone-Context'' on page 151.
This ini file table parameter defines the Phone Context table. The format
296
Description
(No Route to Destination)
(Unallocated Number)
Document #: LTRT-65410
MediaPack Series