3.3.8
Using the Home Page
The 'Home' page provides you with a graphical display of the device's front panel,
displaying color-coded status icons for monitoring the functioning of the device. By default,
the 'Home' page is displayed when you access the device's Web interface. When you are
configuring the device (in a configuration page), you can always return to the 'Home' page,
by simply clicking the Home icon on the toolbar. The 'Home' page also displays general
device information (in the 'General Information' pane) such as the device's IP address and
firmware version.
To access the Home page, take this step:
On the toolbar, click the Home
Note:
The table below describes the areas of the 'Home' page.
Table 3-6: Description of the Areas of the Home Page
Item# / Label
Alarms
Displays the highest severity of an active alarm raised (if any) by the device:
Green = no alarms.
Red = Critical alarm
Orange = Major alarm
Yellow = Minor alarm
To view a list of active alarms in the 'Active Alarms' page (refer to "Viewing Active
Alarms" on page 219), click the Alarms area.
SIP User's Manual
Figure 3-26: MP-11x Home Page
Figure 3-27: MP-124 Home Page
The number and type of channels displayed in the 'Home' page depends on
the device's model (e.g., MP-118 or MP-114).
icon; the 'Home' page is displayed:
Description
48
MediaPack Series
Document #: LTRT-65410