AudioCodes MediaPack MP-124 User Manual page 264

ini File Parameter
IPGroup
SIP User's Manual
You can define multiple table indices having the same
ServedTrunkGroup with different ServingIPGroups, username,
password, and other parameters. This provides the capability for
registering the same Hunt Group to several ITSP's (i.e., Serving IP
Groups).
For configuring the Account table using the Web interface, refer to
''Configuring the Account Table'' on page 185.
For an explanation on using ini file table parameters, refer to
''Structure of ini File Table Parameters'' on page 229.
This ini file table parameter configures the IP Group table. The format of
this parameter is as follows:
[IPGroup]
FORMAT IPGroup_Index = IPGroup_Type, IPGroup_Description,
IPGroup_ProxySetId, IPGroup_SIPGroupName,
IPGroup_ContactUser, IPGroup_EnableSurvivability,
IPGroup_ServingIPGroup, IPGroup_SendInviteToProxy,
IPGroup_AlwaysUseRouteTable;
[\IPGroup]
Where,
Description = Brief description of the IP Group.
ProxySetId = Proxy Set ID associated with the IP Group.
SIPGroupName = Request URI host name used in INVITE and
REGISTER messages.
SendInviteToProxy = If enabled (1), the INVITE as a result of
REFER/3xx messages are sent to the IP Group, overriding the
Refer-To/Contact destination.
AlwaysUseRouteTable = If enabled (1), the device uses the IP
address (or domain name) defined in the 'Tel to IP Routing' table
(refer to ''Tel to IP Routing Table'' on page 156) as the Request URI
host name in outgoing INVITE messages, instead of the value
entered in the SIPGroupName.
For example:
[IPGroup]
FORMAT IPGroup_Index = IPGroup_Type, IPGroup_Description,
IPGroup_ProxySetId, IPGroup_SIPGroupName, IPGroup_ContactUser,
IPGroup_EnableSurvivability, IPGroup_ServingIPGroup,
IPGroup_SendInviteToProxy, IPGroup_AlwaysUseRouteTable;
IPGroup 1 = 0, "Veriz gateway", 1, firstIPgroup, , 0, -1, 0, 0;
IPGroup 2 = 0, "Av server", 2, secondIPgroup, , 0, -1, 0, 0;
IPGroup 3 = 0, "IP phones", 1, thirdIPGroup, , 0, -1, 0, 0;
[\IPGroup]
Notes:
This table parameter can include up to 9 indices (1-9).
The parameters IPGroup_Type, IPGroup_ContactUser,
IPGroup_EnableSurvivability, and IPGroup_ServingIPGroup are
currently not applicable and must be left empty (or -1). These
parameters are used only for IP-to-IP call routing applications
(supported in the next applicable release).
For configuring the IP Group table using the Web interface, refer to
''Configuring the IP Groups'' on page 183.
For an explanation on using ini file table parameters, refer to
''Structure of ini File Table Parameters'' on page 229.
264
Description
Document #: LTRT-65410
MediaPack Series