AudioCodes MediaPack MP-124 User Manual page 294

ini File Parameter
SourceNumberMapIP2Tel This ini file table parameter manipulates the source number for IP-to-Tel
SIP User's Manual
calls. The format of this parameter is as follows:
[SourceNumberMapIp2Tel]
FORMAT SourceNumberMapIp2Tel_Index =
SourceNumberMapIp2Tel_DestinationPrefix,
SourceNumberMapIp2Tel_SourcePrefix,
SourceNumberMapIp2Tel_SourceAddress,
SourceNumberMapIp2Tel_NumberType,
SourceNumberMapIp2Tel_NumberPlan,
SourceNumberMapIp2Tel_RemoveFromLeft,
SourceNumberMapIp2Tel_RemoveFromRight,
SourceNumberMapIp2Tel_LeaveFromRight,
SourceNumberMapIp2Tel_Prefix2Add,
SourceNumberMapIp2Tel_Suffix2Add,
SourceNumberMapIp2Tel_IsPresentationRestricted;
[\SourceNumberMapIp2Tel]
Where,
DestinationPrefix = Destination number prefix.
SourcePrefix = Source number prefix.
SourceAddress = Source IP address (obtained from the Request-
URI in the INVITE message).
NumberType = N/A (set to $$).
NumberPlan = N/A (set to $$).
RemoveFromLeft = Number of stripped digits from the left.
RemoveFromRight = Number of stripped digits from the right.
LeaveFromRight = Number of remaining digits from the right.
Prefix2Add = String to add as prefix.
Suffix2Add = String to add as suffix.
IsPresentationRestricted = N/A, set to $$.
For example:
[SourceNumberMapIp2Tel]
SourceNumberMapIp2Tel 0 = 22,03,$$,$$,$$,$$,2,667,$$,$$;
SourceNumberMapIp2Tel 1 = 034,01,1.1.1.1,$$,0,2,$$,$$,972,$$,10;
[\SourceNumberMapIp2Tel]
Notes:
RemoveFromLeft, RemoveFromRight, Prefix2Add, Suffix2Add, and
LeaveFromRight are applied if the called and calling numbers match
the DestinationPrefix, SourcePrefix, and SourceAddress conditions.
The manipulation rules are executed in the following order:
RemoveFromLeft, RemoveFromRight, LeaveFromRight, Prefix2Add,
and Suffix2Add.
Parameters can be skipped by using two dollar signs ('$$').
The Source IP address can include the 'x' wildcard to represent
single digits. For example: 10.8.8.xx represents all addresses
between 10.8.8.10 and 10.8.8.99.
The Source IP address can include the asterisk ('*') wildcard to
represent any number between 0 and 255. For example, 10.8.8.*
represents all the addresses between 10.8.8.0 and 10.8.8.255.
294
Description
Document #: LTRT-65410
MediaPack Series