AudioCodes MediaPack MP-124 User Manual page 287

SIP User's Manual
ini File Parameter
TrunkGroupSettings
AddTrunkGroupAsPrefix
AddPortAsPrefix
UseSourceNumberAsDisp
layName
UseDisplayNameAsSourc
eNumber
AlwaysUseRouteTable
Version 5.4
This ini file table parameter defines rules for port allocation per Hunt
Group. If no rule exists, the global rule defined by the parameter
ChannelSelectMode takes effect. The format of this parameter is as
follows:
[TrunkGroupSettings]
FORMAT TrunkGroupSettings_Index =
TrunkGroupSettings_TrunkGroupId,
TrunkGroupSettings_ChannelSelectMode,
TrunkGroupSettings_RegistrationMode,
TrunkGroupSettings_GatewayName,TrunkGroupSettings_ContactUse
r, TrunkGroupSettings_ServingIPGroup;
[\TrunkGroupSettings]
Where,
TrunkGroupId = Hunt Group ID number.
ChannelSelectMode = Channel select mode for the HuntGroup.
Available values are identical to those defined by the
ChannelSelectMode parameter.
RegistrationMode = Registration mode for the HuntGroup (Per
Endpoint [0], Per Gateway [1], or Do Not Register [4]). If not
configured [-1], the value of AuthenticationMode is used.
GatewayName = SIPGatewayName used as a hostname in the
From header in INVITE and REGISTER messages. If not configured,
the parameter SIPGatewayName is used.
ContactUser = User part in contact URI in INVITE, and in From, To
and Contact headers in REGISTER.
ServingIPGroup = Serving IP Group ID to where INVITE messages
initiated by the Hunt Group endpoints are sent.
For example:
[TrunkGroupSettings]
TrunkGroupSettings 0 = 1, 0, 5, audiocodes, user, 1;
TrunkGroupSettings 1 = 2, 1, 0, localname, user1, 2;
[\TrunkGroupSettings]
Notes:
This parameter can include up to 24 indices.
For configuring Hunt Groups using the Web interface, refer to
''Configuring Hunt Group Settings'' on page 180.
For a description on using ini file table parameters, refer to
''Structure of ini File Table Parameters'' on page 229.
For a description of this parameter, refer to ''Routing General
Parameters'' on page 153.
For a description of this parameter, refer to ''Routing General
Parameters'' on page 153.
For a description of this parameter, refer to ''Routing General
Parameters'' on page 153.
For a description of this parameter, refer to ''SIP General Parameters''
on page 100.
For a description of this parameter, refer to ''Proxy & Registration
Parameters'' on page 110.
287
4. ini File Configuration
Description
May 2008