Call Routing Status; Table 3-58: Call Routing Status Parameters - AudioCodes MediaPack MP-124 User Manual

Counter
Number of Failed Indicates the number of calls that failed due to unavailable resources or a
Calls due to No device lock. The counter is incremented as a result of one of the following
Resources release reasons:
Number of Failed This counter is incremented as a result of calls that failed due to reasons not
Calls due to Other covered by the other counters.
Failures
Average Call The average call duration (ACD) in seconds of established calls. The ACD
Duration (ACD) value is refreshed every 15 minutes and therefore, this value reflects the
[sec] average duration of all established calls made within a 15 minute period.
Attempted Fax Indicates the number of attempted fax calls.
Calls Counter
Successful Fax Indicates the number of successful fax calls.
Calls Counter
3.6.2.2

Call Routing Status

The 'Call Routing Status' page provides you with information on the current routing method
used by the device. This information includes the IP address and FQDN (if used) of the
Proxy server with which the device currently operates.
To view the call routing status, take this step:
Open the 'Call Routing Status' page (Status & Diagnostics tab > Gateway Statistics
menu > Calls Routing Status page item).
Parameter
Current Call-Routing
Method
Current Proxy
Current Proxy State
SIP User's Manual
GWAPP_RESOURCE_UNAVAILABLE_UNSPECIFIED
RELEASE_BECAUSE_GW_LOCKED
Figure 3-112: Call Routing Status Page

Table 3-58: Call Routing Status Parameters

Proxy = Proxy server is used to route calls.
Routing Table preferred to Proxy = The 'Tel to IP Routing' table takes
precedence over a Proxy for routing calls ('Prefer Routing Table'
parameter is set to 'Yes' as described in ''Proxy & Registration
Parameters'' on page 110).
Not Used = Proxy server isn't defined.
IP address and FQDN (if exists) of the Proxy server with which the
device currently operates.
N/A = Proxy server isn't defined.
OK = Communication with the Proxy server is in order.
Fail = No response from any of the defined Proxies.
222
Description
Description
Document #: LTRT-65410
MediaPack Series