AudioCodes MediaPack MP-124 User Manual page 245

SIP User's Manual
ini File Parameter
ExtBootPReqEnable
Serial Parameters
DisableRS232
SerialBaudRate
SerialData
SerialParity
SerialStop
SerialFlowControl
Version 5.4
[0] = Disable (default).
[1] = Enable extended information to be sent in BootP request.
If enabled, the device uses the vendor specific information field in the
BootP request to provide device-related initial startup information such as
blade type, current IP address, software version, etc. For a full list of the
vendor specific Information fields, refer to the Product Reference Manual.
The BootP/TFTP configuration utility displays this information in the
'Client Info' column (refer to the Product Reference Manual).
Note: This option is not available on DHCP servers.
[0] = RS-232 serial port is enabled (default).
[1] = RS-232 serial port is disabled.
The RS-232 serial port can be used to change the networking
parameters and view error / notification messages.
For information on establishing a serial communications link with the
device, refer to the device's Fast Track.
Determines the value of the RS-232 baud rate.
The valid range is any value. It is recommended to use the following
standard values: 1200, 2400, 9600 (default), 14400, 19200, 38400,
57600, 115200.
Determines the value of the RS-232 data bit.
[7] = 7-bit.
[8] = 8-bit (default).
Determines the value of the RS-232 polarity.
[0] = None (default).
[1] = Odd.
[2] = Even.
Determines the value of the RS-232 stop bit.
[1] = 1-bit (default).
[2] = 2-bit.
Determines the value of the RS-232 flow control.
[0] = None (default).
[1] = Hardware.
245
4. ini File Configuration
Description
May 2008