Motorola WiNG 5.4.2 System Reference Manual page 320

5 - 254 WiNG 5.4.2 Access Point System Reference Guide
3. Select Profile Overrides
4. Select Security
5. Select Settings.
NOTE: A blue override icon (to the left of a parameter) defines the parameter as having
an override applied. To remove an override, go to the Basic Configuration screen's
Device Overrides
from the device.
6. Refer to the General field to assign or override the following:
WEP Shared Key
Authentication
7. Select OK to save the changes or overrides. Select
5.4.4.5.6 Overriding a Certificate Revocation List (CRL) Configuration
Overriding a Security Configuration
A certificate revocation list (CRL) is a list of certificates that have been revoked or are no longer valid. A certificate can be
revoked if the certificate authority (CA) had improperly issued a certificate, or if a private-key is compromised. The most
common reason for revocation is the user no longer being in sole possession of the private key.
To define a Certificate Revocation configuration or override:
1. Select Devices
from the Device menu to expand it into sub menu options.
to expand its sub menu options.
field and select
Figure 5-160 Profile Overrides - Security Settings screen
Select this option to require devices using this profile to use a WEP key to access the
network using this profile. Clients without Motorola Solutions adapters need to use
WEP keys manually configured as hexadecimal numbers. This option is disabled by
default.
from the Configuration tab.
Clear Overrides. This will remove all overrides
Reset to revert to the last saved configuration.