Table of Contents
Advertisement
5 - 100 WiNG 5.4.2 Access Point System Reference Guide
5.2.6.2 Auto IPSec Tunnel
Profile Security Configuration
IPSec tunnels are established to secure traffic, data and management traffic, from access points to remote wireless controllers.
Secure tunnels must be established between access points and the wireless controller with minimum configuration pushed
through DHCP option settings.
1. Select the
Configuration
2. Select Devices.
3. Select
System Profile
4. Expand the
Security
5. Refer to the following table to configure the Auto IPSec Tunnel settings:
Group ID
Authentication Type
Authentication Key
IKE Version
6. Select
OK
to save the updates made to the
configuration.
tab from the Web UI.
from the options on left-hand side of the UI.
menu and select
Auto IPSec
Figure 5-59 Profile Security – Auto IPSec Tunnel screen
Configure the ID string used for IKE authentication.
Set the IPSec Authentication Type. Options include PSK (Pre Shared Key) or rsa.
Set the common key for authentication between the remote tunnel peer.
Configure the IKE version to use. The available options are ikev1-main, ikev1-aggr and
ikev2.
Auto IPSec Tunnel
Tunnel.
screen. Selecting
Reset
reverts the screen to its last saved
Hide quick links:
Advertisement
Table of Contents
