Motorola WiNG 5.4.2 System Reference Manual page 260

5 - 194 WiNG 5.4.2 Access Point System Reference Guide
5.4.4.3.4 Radio Override Configuration
Profile Interface Override Configuration
Access points can have their radio profile configurations overridden if a portion of a profile is no longer relevant to the access
point's deployment objective.
To define a radio configuration override for an access point:
1. Select the Configuration
1. Select Devices
2. Select Device
3. Select a target access point from the
4. Select Profile Overrides
5. Select Interface
6. Select Radios.
NOTE: A blue override icon (to the left of a parameter) defines the parameter as having
an override applied. To remove an override, go to the Basic Configuration screen's Device
Overrides field and select Clear Overrides. This will remove all overrides from the device.
7. Review the following radio configuration data to determine whether a radio configuration requires modification or override:
Name
tab from the Web UI.
from the Configuration tab.
Overrides.
Device Browser
from the Device menu to expand it into sub menu options.
to expand its sub menu options.
Figure 5-120 Profile Overrides - Access Point Radios screen
Displays whether the reporting radio is the access point's radio1, radio2 or radio3. AP7131
models can support up to 3 radios. AP6522, AP6532, AP6562, AP8132 and AP7161 models
support 2 radios and AP6511 and AP6521 models support a single radio.
in the lower, left-hand, side of the UI.