Motorola WiNG 5.4.2 System Reference Manual page 709

Table of Contents

Advertisement

The
General
field describes the following:
Name
Displays the name of the access point interface selected from the upper, left-hand side, of the
screen. AP650, AP6511, AP6521, AP6522, AP6532, AP6562, AP8132 and AP71XX models
support different interfaces.
Interface MAC
Displays the MAC address of the access point interface.
Address
IP Address
IP address of the interface.
IP Address Type
Lists the IP address type of the interface.
Hardware Type
Displays the hardware connected type of the interface.
Index
Displays the unique numerical identifier supporting the interface.
Access VLAN
Displays the virtual interface the VLAN can access.
Access Setting
Displays the mode of the VLAN as either Access or Trunk.
Administrative
Displays whether the interface is currently true or false.
Status
The
Specification
field displays the following:
Media Type
Displays the physical connection type of the interface.
Medium types are:
• Copper - Used on RJ-45 Ethernet ports
• Optical - Used on fibre optic gigabit Ethernet ports
Protocol
Displays the name of the routing protocol adopted by the selected interface.
MTU
Displays the maximum transmission unit (MTU) setting configured on the interface. The MTU
value represents the largest packet size that can be sent over a link. 10/100 Ethernet ports
have a maximum setting of 1500.
Mode
The mode can be either:
• Access – This Ethernet interface accepts packets only from the native VLANs.
• Trunk – This Ethernet interface allows packets from a given list of VLANs that you can add
Metric
Displays the metric value associated with the route through the selected interface.
Maximum Speed
Displays the maximum speed at which the selected interface transmits or receives data.
Admin. Speed
Displays the speed setting used when using the administrative interface.
Operator Speed
Displays the current speed of the data transmitted and received over the interface.
Admin. Duplex
Displays the administrator's duplex setting.
Setting
Current Duplex
Displays the interface as either half duplex, full duplex or unknown.
Setting
to the trunk.
13 - 83

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents