Table of Contents
Advertisement
Figure 5-148 Profile Overrides - Add Network Bridge VLAN screen
8. If adding a new Bridge VLAN configuration, use the spinner control to define or override a VLAN ID from 1 - 4094. This value
must be defined and saved before the General tab can become enabled and the remainder of the settings defined. VLAN
IDs 0 and 4095 are reserved and unavailable.
9. If creating a new Bridge VLAN, provide a Description (up to 64 characters) unique to the VLAN's specific configuration to
help differentiate it from other VLANs with similar configurations.
10. Set or override the following general parameters:
Per VLAN Firewall
L2 Tunnel Broadcast
Optimization
Select to enable Firewall on each virtual interface. Firewalls create huge flow tables. This
feature enables firewalls to be enabled or disabled on a per VLAN basis. Thus, the creation
and storage of flow tables is controllable.
Select to enable L2 Tunnel Broadcast Optimization. Enable this to prevent flooding of ARP
packets over the virtual interface. Based on learned information, ARP packets are filtered
at the wireless controller level.
5 - 239
Hide quick links:
Advertisement
Table of Contents
