Motorola WiNG 5.4.2 System Reference Manual page 661

Figure 13-18 RF Domain - Mesh Point Device Brief Info screen
The All Roots and Mesh Points
MAC
Mesh Point Name
Hostname
Configured as Root
MP ID
Root Hops
IFID Count
The Mesh Point Details field on the bottom portion of the screen displays tabs for General, Path, Root, Multicast Path,
Neighbors, Security and Proxy. Refer to the following:
The General tab displays the following:
Mesh Point Name
MAC
Hostname
Configured as Root
field displays the following:
Displays the MAC Address of each configured Mesh Point in the RF Domain.
Displays the name of each configured Mesh Point in the RF Domain.
Displays the hostname for each configured Mesh Point in the RF Domain.
A Root Mesh Point is defined as a Mesh Point that is connected to the WAN and provides
a wired backhaul to the network. (Yes/No)
The MP identifier is used to distinguish between other Mesh Points both on the same
device and on other devices. This is used by a user to setup the preferred root
configuration.
The number of devices between the selected Mesh Point and the destination device.
Displays the number of Interface IDs (IFIDs) associated with all the configured Mesh
Points in the RF Domain.
Displays the name of each configured Mesh Point in the RF Domain.
Displays the MAC Address of each configured Mesh Point in the RF Domain.
Displays the hostname for each configured Mesh Point in the RF Domain.
A Root Mesh Point is defined as a Mesh Point that is connected to the WAN and provides
a wired backhaul to the network. (Yes/No)
13 - 35