Table of Contents
Advertisement
17. Refer to the
Country and Time Zone
•
Location
- Define the location of the access point. The
point can be located within the managed wireless network.
•
Contact
- Specify the contact information for the administrator. The credentials provided should accurately reflect the
individual responding to service queries.
•
Country
- Select the country where the access point is deployed. The access point prompts for the correct country code
on the first login. A warning message also displays stating an incorrect country setting may result in illegal radio
operation. Selecting the correct country is central to legal operation. Each country has its own regulatory restrictions
concerning electromagnetic emissions and the maximum RF signal strength that can be transmitted. This is a required
parameter.
•
Time Zone
- Set the time zone where the access point is deployed. This is a required parameter. The setting should be
complimentary with the selected deployment country.
18. If an NTP resource is unavailable, set the
Optionally enter the IP address of a server used to provide system time to the access point. Once the IP address is entered,
the Network Time Protocol (NTP) functionality is engaged automatically for synchronization with the NTP resource.
Figure 3-12 Initial Setup Wizard - Country/Date/Time screen
field to set the following device deployment information:
System Date and Time
Location
parameter acts as a reminder of where the access
(calendar date, time and AM/PM designation).
3 - 15
Hide quick links:
Advertisement
Table of Contents
