Motorola WiNG 5.4.2 System Reference Manual page 162

5 - 96 WiNG 5.4.2 Access Point System Reference Guide
29. Select either the
or IKEv2.
IKEv2 provides improvements from the original IKEv1 design (improved cryptographic mechanisms, NAT and firewall
traversal, attack resistance etc.) and is recommended in most deployments. The appearance of the screen differs depending
on the selected IKE mode.
30. Set the following
Authentication Method
Figure 5-57 Profile Security - Remote VPN Server tab (IKEv2 example)
IKEv1 or IKEv2 radio button to enforce peer key exchanges over the remote VPN server using either IKEv1
IKEv1 or IKe v2 Settings:
Use the drop-down menu to specify the authentication method used to validate the
credentials of the remote VPN client. Options include Local (on board RADIUS resource
if supported) and RADIUS (designated external RADIUS resource). If selecting Local,
select the + Add Row
authenticating remote VPN client connections with the local RADIUS resource. The
default setting is Local. AP6511 and AP6521 model access points do not have a local
RADIUS resource and must use an external RADIUS server resource.
button and specify a User Name and Password for