Motorola WiNG 5.4.2 System Reference Manual page 140

5 - 74 WiNG 5.4.2 Access Point System Reference Guide
26. Use the Inbound IP Firewall Rules
route.
Either select an existing IP firewall policy or use the default set of IP firewall rules. The firewall inspects OSPF route traffic
flows and detects potential attacks on the dynamic route not visible to traditional wired firewall appliances. Select the
Create icon to define a new set of IP firewall rules that can be applied to the OSPF route configuration. Selecting
allows for the modification of an existing IP firewall rules configuration. For more information, see
page 8-2.
27. Select OK to save the changes to the OSPF route security configuration. Select
configuration.
Figure 5-41 Network - OSPF Virtual Interface - Security tab
drop-down menu to select the IP access and deny rules to apply to the OSPF dynamic
Wireless Firewall on
Reset to revert to the last saved
Edit