Table of Contents
Advertisement
Channel Hold Time
Client Threshold
5 GHz Channel Switch
Delta
2.4 GHz Channel
Switch Delta
24. Select
OK
to update the Smart RF Interference Recovery settings. Select
25. Select the
Coverage Hole Recovery
Figure 6-40 SMART RF Recovery Configuration screen - Coverage Hole Recovery tab
Defines the minimum time between channel changes during neighbor recovery. Set the time
in either Seconds (0 - 86,400), Minutes (0 - 1,440) or Hours (0 - 24) or Days (0 - 1). The default
setting is 1 hour.
Use the spinner to set a client threshold from 1 - 255. If the threshold defined number of
clients are connected to a radio, the radio does not change its channel, even though
required, based on the interference recovery determination made by the smart master. The
default setting is 50.
Use the spinner to set a channel switch delta (from 5 - 35 dBm) for the 5.0 GHz radio. This
parameter is the difference between noise levels on the current channel and a prospective
channel. If the difference is below the configured threshold, the channel will not change.
The default setting is 20 dBm.
Use the spinner to set a channel switch delta (from 5 - 35 dBm) for the 2.4 GHz radio. This
parameter is the difference between noise levels on the current channel and a prospective
channel. If the difference is below the configured threshold, the channel will not change.
The default setting is 20 dBm.
tab.
Reset
to revert to the last saved configuration.
6 - 89
Hide quick links:
Advertisement
Table of Contents
